.

Featured Products

2005 International 4200 Mechanic's Truck

2005 International 4200 Extended Cab Mechanic's Truck. This truck is set-up right with a VT365 Diesel and 5 Speed Automatic Transmission; and this truck really runs down the road nice. This was an Altec Service Truck, you can tell it has been taken care of-and it is ready to get back to work. The Altec service body is in nice shape, with very nice toolbox storage. The Tiger 6000# Material Crane works nice, operates from a hand-held controller located in one of the rear toolboxes. For air, you have an Ingersoll Rand VHP30RMH unit mounted on top of the passenger side toolbox, making 175cfm-and sending it to a hose reel concealed behind a door at the rear of the truck. The interior features air conditioning, AM/FM/Cassette, cruise control, and an air drivers' seat. This International rolls on 22.5" tires, all checking out at at 75% tread depth remaining. If you are looking for a late model service truck, then you just found it!more

Single Man Buckets

Single and Double man buckets. We have a pretty good assortment of buckets to fit all applications and many are new and we will sell them at half the cost you would pay for new! Give us a call to see if we have what you need!more

Ford LN7000 Dump Truck

1989 Ford LN7000 dump truck. This truck is powered by a 6.6 liter Ford Turbo diesel engine, followed up by a 5 speed manual transmission. The engine and transmission really run out nice on this truck, makes sense-it only shows 034,954 miles on the odometer. This truck does have air brakes, and they stop the truck just as they should. The dumpbox measures 11' long, and it does have 4' sides. The tires are 22.5' and they all have about 40% tread remaining. more

GMC C6500 Forestry Truck

2001 GMC C6500 Forestry Bucket Truck. This is a solid, gas powered bucket truck with a great reach, handy dump box, and convenient Pony motor to save you money on fuel. This truck is powered by a smooth running 8.1 Liter gasoline engine, backed up by a 5 speed manual transmission-plenty of power to haul this big around. The boom is a smooth working Hi Ranger SCII-47, with a 52' working height that does go over center. The single man bucket features pistol grip operation and has hydraulic tool outlets on the bucket, with the bucket having a 400# capacity rating. You will feel confident and steady even at 52' up thanks to the 2 hydraulic outriggers. The dumpbox measures 9', with a swing open rear door. This truck also has a nice working Kubota 3 cylinder gasoline Pony Motor, which will run all of the trucks' hydraulics-the boom, outriggers, and the dump box. You can run off the Pony Motor to save fuel vs. running the truck engine and running off the PTO. Both engines run off the gasoline in the fuel tank. These forestry trucks are made to haul chippers around, so it is set up with a pintle hitch and electric brake controller. The tires are 22.5", all look to have at least 40% tread depth. This truck was last inspected in March 2010-should be ready to hit the jobsite running! With hydraulic brakes and a GVWR of 25950, this truck will come in under CDL-should be easy for about anyone on your team to drive. If you are looking to get into the tree business, or any aerial work, this would be a great truck to work out of.more
  • 513 N. McKinley
  • P.O. Box 88
  • Knoxville, IA 50138
  • 641-218-8697
  • 641-828-7224
  • jody@landjenterpriseinc.com
  • Mon/Fri• 9AM - 5PM
  • Sat• By Appt.
  • Sun• Closed

About

L & J Enterprise

Larry Ball Jr and Jody Hegwood became friends with Larry as a sprint car driver and Jody as a mechanic. We started selling a few trucks as a way to make a little extra money on the side to help fund our racing habits. By December of 2006 we decided to make this our living, since Larry was losing his job as a tool and die maker at Maytag after 20 years of service, (the factory closed after over 100 years of existence!), and Jody was tired of running a shop for someone else. L & J Enterprise Inc. was founded and a dealership was started. Jody has been a mechanic for 20 years and is an ASE Certified Master Technician. Because of Jody’s mechanical abilities, our business is centered on his ability to diagnose and fix most any problem and refurbish our trucks and equipment. We deal in all different kinds of trucks and equipment and if we do not have it on hand, we will find it for you! 2009 was a good year for L & J Enterprise Inc. as we grew to 5 fulltime employees and sold 500 units. Our inventory is constantly revolving as we try to turn over inventory every 30-60 days. We hope you check back frequently on our site, give us a call or shoot us an email!
This site's information is written and maintained by Jamie Ball.