2005 International 4200 Extended Cab Mechanic's Truck. This truck is set-up right with a VT365 Diesel and 5 Speed Automatic Transmission; and this truck really runs down the road nice. This was an Altec Service Truck, you can tell it has been taken care of-and it is ready to get back to work. The Altec service body is in nice shape, with very nice toolbox storage. The Tiger 6000# Material Crane works nice, operates from a hand-held controller located in one of the rear toolboxes. For air, you have an Ingersoll Rand VHP30RMH unit mounted on top of the passenger side toolbox, making 175cfm-and sending it to a hose reel concealed behind a door at the rear of the truck. The interior features air conditioning, AM/FM/Cassette, cruise control, and an air drivers' seat. This International rolls on 22.5" tires, all checking out at at 75% tread depth remaining. If you are looking for a late model service truck, then you just found it!more

1990 Ford LN8000 snow plow truck with a nice salt spreader box. This truck is powered by a 7.6 liter Ford turbo diesel engine, followed up by a 6 speed manual transmission. Up front, you will find a heavy duty 10' snow blade, should make short work out of about any blade job out there. The 12' Flint Spreader box is in good shape, ready to throw some salt and keep your lot or lane safe this winter. This truck does have air brakes, as well as air controlled PTO operation. The tires are 22.5' and are all about 65% tread remaining.more

1997 Ford F700 Forestry Bucket Truck. This truck is powered by a nice running 5.9 liter Cummins Diesel, backed up by a 4 speed automatic transmission-more power than you will ever need in this truck! The boom is a smooth working Lift-All LAOC-51-1S, with a 56' working height that does go over center. The single man bucket features pistol grip operation and has hydraulic tool outlets on the bucket. You will feel confident and steady even at 56' up thanks to the 2 hydraulic outriggers. The dumpbox measures 11', with a swing open rear door. These forestry trucks are made to haul chippers around, so it is set up with a pintle hitch and electric brake controller. The tires are 22.5", the fronts are at 50% tread, with the rears checking out at only 10% tread remaining. This truck does come with a set of Lift-All Manuals, and also has a flashing beacon mounted atop the chipper box. The throttle pedal could stand to be replaced, sometimes you have to fool with it to get full throttle-should still be available from Ford. If you are looking to get into the tree business, or any aerial work, this would be a great truck to work out of.more

2001 Vermeer V8100 Combo Trencher. This machine is just in from a utility outfit and it can really put in the work! With a Cummins 3.9 Diesl and 4 speed transmission, you will not come up short on power. The boom measures 72" from the auger to the tip, and is set up with rock/frost teeth followed up by a power crumber. Up front, the backhoe attachment is easy to operate from the front seat, and you will feel secure thanks to the 2 hydraulic outriggers. The backhoe has an 18" bucket that can really put in the work. Under the bucket you will find a 80" backfill blade that operates easily from either seat. This machine rolls on 38x18x20 rubber, and all 4 tires check out at 50% tread depth. This machine has two nice seats, no tears in either one. This V8100 also comes with a boring attachment. You will find this machine to be super maneuverable, thanks to the 4 wheel drive AND the 4 wheel steering. Everything on this trencher works like it should; Vermeer builds these units to work, and work they do. more