2005 International 4200 Extended Cab Mechanic's Truck. This truck is set-up right with a VT365 Diesel and 5 Speed Automatic Transmission; and this truck really runs down the road nice. This was an Altec Service Truck, you can tell it has been taken care of-and it is ready to get back to work. The Altec service body is in nice shape, with very nice toolbox storage. The Tiger 6000# Material Crane works nice, operates from a hand-held controller located in one of the rear toolboxes. For air, you have an Ingersoll Rand VHP30RMH unit mounted on top of the passenger side toolbox, making 175cfm-and sending it to a hose reel concealed behind a door at the rear of the truck. The interior features air conditioning, AM/FM/Cassette, cruise control, and an air drivers' seat. This International rolls on 22.5" tires, all checking out at at 75% tread depth remaining. If you are looking for a late model service truck, then you just found it!
more
Single and Double man buckets. We have a pretty good assortment of buckets to fit all applications and many are new and we will sell them at half the cost you would pay for new! Give us a call to see if we have what you need!
more
2001 Vermeer V8100 Combo Trencher. This machine is just in from a utility outfit and it can really put in the work! With a Cummins 3.9 Diesl and 4 speed transmission, you will not come up short on power. The boom measures 72" from the auger to the tip, and is set up with rock/frost teeth followed up by a power crumber. Up front, the backhoe attachment is easy to operate from the front seat, and you will feel secure thanks to the 2 hydraulic outriggers. The backhoe has an 18" bucket that can really put in the work. Under the bucket you will find a 80" backfill blade that operates easily from either seat. This machine rolls on 38x18x20 rubber, and all 4 tires check out at 50% tread depth. This machine has two nice seats, no tears in either one. This V8100 also comes with a boring attachment. You will find this machine to be super maneuverable, thanks to the 4 wheel drive AND the 4 wheel steering. Everything on this trencher works like it should; Vermeer builds these units to work, and work they do.
more
2001 GMC C6500 Forestry Bucket Truck. This is a solid, gas powered bucket truck with a great reach, handy dump box, and convenient Pony motor to save you money on fuel. This truck is powered by a smooth running 8.1 Liter gasoline engine, backed up by a 5 speed manual transmission-plenty of power to haul this big around. The boom is a smooth working Hi Ranger SCII-47, with a 52' working height that does go over center. The single man bucket features pistol grip operation and has hydraulic tool outlets on the bucket, with the bucket having a 400# capacity rating. You will feel confident and steady even at 52' up thanks to the 2 hydraulic outriggers. The dumpbox measures 9', with a swing open rear door. This truck also has a nice working Kubota 3 cylinder gasoline Pony Motor, which will run all of the trucks' hydraulics-the boom, outriggers, and the dump box. You can run off the Pony Motor to save fuel vs. running the truck engine and running off the PTO. Both engines run off the gasoline in the fuel tank. These forestry trucks are made to haul chippers around, so it is set up with a pintle hitch and electric brake controller. The tires are 22.5", all look to have at least 40% tread depth. This truck was last inspected in March 2010-should be ready to hit the jobsite running! With hydraulic brakes and a GVWR of 25950, this truck will come in under CDL-should be easy for about anyone on your team to drive. If you are looking to get into the tree business, or any aerial work, this would be a great truck to work out of.
more